草地学报 ›› 2012, Vol. 20 ›› Issue (3): 518-523.DOI: 10.11733/j.issn.1007-0435.2012.03.021

• 研究论文 • 上一篇    下一篇

假俭草耐铝性遗传分析

褚晓晴1,2, 郭海林1, 陈静波1, 宗俊勤1, 刘建秀1   

  1. 1. 江苏省中国科学院植物研究所, 江苏 南京 210014;
    2. 南京农业大学园艺学院, 江苏 南京 210095
  • 收稿日期:2011-12-07 修回日期:2012-02-27 出版日期:2012-06-15 发布日期:2012-07-05
  • 通讯作者: 刘建秀,E-mail:turfunit@yahoo.com.cn
  • 作者简介:褚晓晴(1988- ),女,山东枣庄人,硕士研究生,研究方向为假俭草种质资源及遗传育种,E-mail:cxq.yx@163.com
  • 基金资助:
    国家自然基金项目(30972017); 江苏省科技厅基础设施项目(BM2009905)资助

Genetic Analysis of Al-Tolerance in Centipede Grass

CHU Xiao-qing1,2, GUO Hai-lin1, CHEN Jing-bo1, ZONG Jun-qin1, LIU Jian-xiu1   

  1. 1. Institute of Botany, Jiangsu Province & Chinese Academy of Sciences, Nanjing, Jiangsu Province 210014, China;
    2. College of Horticulture, Nanjing Agricultural University, Nanjing, Jiangsu Province 210095, China
  • Received:2011-12-07 Revised:2012-02-27 Online:2012-06-15 Published:2012-07-05

摘要: 为探讨假俭草(Eremochloa ophiurtoides (Munro.) Hack.)耐铝性的遗传规律,选用耐铝性存在差异的假俭草种质材料E102和E092(1)进行杂交,获得F1分离群体,并测定F1群体73份后代和2份亲本的相对根系干重、相对地上部分干重、相对全株干重,以耐铝隶属函数值为指标,应用植物数量性状主基因+多基因混合遗传模型分析方法对F1群体的耐铝性进行遗传分析。结果表明:在调查的3个生物量指标中,变异系数由大到小依次是相对根系干重(25.36%)>相对地上干重(21.76%)>相对全株干重(20.15%),耐铝隶属函数的变异系数为42.28%;耐铝性的最佳遗传模型为A-0模型,即无主基因模型,表明该群体中耐铝性状表现出由误差或误差+多基因所修饰的单一正态分布特征。本研究明确了假俭草耐铝性状的遗传规律,为假俭草耐铝性的基因和QTL定位以及品种改良、标记辅助育种等方面提供科学依据。

关键词: 假俭草, 杂交后代, 耐铝性, 遗传分析

Abstract: In order to study genetic regularity of centipede grass aluminum tolerance, F1 segregated populations were obtained from two centipede grass accessions[E102 and E092(1)] with different aluminum tolerances. Relative root dry weight, relative shoot dry weight, relative whole plant dry weight of 73 offsprings of F1 groups were measured. A total of 73 hybrids with their parents were tested using Major Genes and Polygenes Genetic Analysis method. Results showed that coefficient of variation, relative root weight, relative shoot weight, and relative total weight were 42.28%, 25.36%, 21.76% and 20.15% respectively. The best genetic model for aluminum tolerance of this population was model A-0, namely no major gene controlled this characteristic. This study clarifies the genetic regularity of centipede grass aluminum tolerance and provides scientific basis for an aluminum tolerance gene and QTL positioning, varieties improvement and marker assisted breeding.

Key words: Centipede grass, F1 hybrids, Aluminum tolerance, Genetic analysis

中图分类号: